Solar Flashlight


  • Product description:


    This solar torch combines the highest quality international monocrystal silicon wafer with the characteristics of a high conversion rate and good charging effect. With a 10-year usage life, it can be used as a standby power supply for travel, business trips, field tasks, long distance vehicles and ships, as well as home illumination. Safe and reliable with a small size and long usage life, it is an environment friendly product.


  • Technical parameters:


    Solar battery power: 0.2W
    Storage battery: 600mAh/1.2V
    LED output power: 0.4W
    LED luminance: 14000~16000mcd
    Life: 100000h
    Effective distance: 4m
    Charging and discharging time: when charged for 6 hours at 1000W/M 25 degrees C, it can illuminate for 3-3.5 hours continuously.
    Surface: anode hardening treatment.
    Usage temperature: -30~+50 degrees C.

buy now


< Back to Products

Terms & Conditions | Contact Us

Solar Torch - SF-01


  • Product configuration:


    1. Charging mode: solar energy
    2. (PC) Solar cover: PC
    3. Storage battery: Nickel-hydrogen battery
    4. Spotlight: super bright white light 5LED
    5. Illumination control switch: LED/OFF/ON (middle)
    6. Portable belt: aeroplane locking belt
    7. Product material: aluminium alloy


  • Working principle and usage:


    1. Working principle:
    Charge the inside equipped storage battery by exposing the solar plate to sunshine, the LED illuminates with the inside equipped storage battery through the central control switch. (The solar plate must face sunshine to be fully effective.)

    2. Usage:
    Press the central control switch to illuminate, the illuminating LED lights up, press again to switch off the illuminating LED. Low luminance shows insufficient charge of the inside equipped battery, it is therefore necessary to charge the inside equipped battery. The control switch must be set to OFF while charging, or it will be discharged and cannot charge the inside equipped battery which affects illumination.


  • Product characteristics:


    1. Environment friendly and energy saving
    2. Safe and reliable


  • Precautions:


    1. Avoid placing it in high temperature (above 50 degrees C), moist or corrosive environments and do not use it near to a fire source.
    2. Use a towel to wipe the product surface if it becomes damp and do not allow it to overheat.
    3. Do not place it near to water, oil or dirt, or nick the product surface, solar cover or LED cover with an edged tool.
    4. The product must never be put into a fire as this could cause an explosion.
    5. Do not disassemble the product under any circumstances.